A proper set of certificates, and you should ask for them before the van leaves. Say you’re selling a place in Wednesbury, the buyer’s insurer starts asking questions, and nobody can find a single document for the electrics. Cue a very awkward week. That scene is why paperwork after house rewires matters.
Browns Electrical, a family run firm in Bilston, certifies its work, and the same goes when it acts as an EV charger installer. Here’s what that paperwork covers and why it’s worth keeping safe.
What does BS 7671 have to do with it?
BS 7671 is the IET Wiring Regulations. Browns Electrical says all its electrical work is carried out and certified to the current version. In practice that means testing the work and issuing certification, rather than just walking away once the lights turn on.
For homeowners, it’s a plain document that says the job was tested. Nothing flashy. It’s the kind of paper you slide into a folder and forget about until a buyer, insurer or building control wants to see it.
What about Part P?
Part P is the Building Regulations part covering electrical safety in dwellings. Browns Electrical completes notifiable work in dwellings and certifies it in line with Part P, with documentation you can show to insurers and building control.
If you’re unsure whether your job counts as notifiable, just ask the electrician at the quote stage. It’s an easy question, and a good tradesperson answers it without fuss.
Which jobs come with testing certification?
A bathroom customer on the site had a rewire, new spot lights, pendant lights and an extractor fan, and received testing certification at the end. That’s the pattern: do the work, test it, hand over the paper. Nothing hidden.
The same approach applies to bigger jobs. Whether it’s a log cabin installation with conduit and sockets or a full rewire, the work is certified to the same standard. Different sizes of job, the same expectations about paperwork.
What happens with a charger?
An approved Ohme installer like Browns Electrical supplies and fits the Ohme Home Pro and the Ohme ePod, then tests and certifies the installation. Pricing depends on the model, the cable distance and any supply upgrades, all agreed in a written quote first.
A dependable EV charger installer doesn’t treat the certificate as an extra. It’s part of the install, in the same way tightening the last screw is part of the install.
Why keep the documents safe?
Because paperwork has a habit of mattering later. An insurer might ask after a claim. Building control might ask when you extend. A buyer’s surveyor might want to see proof. Documents you can show are far easier than arguing about what was done years ago.
Put certificates in one folder, physical or digital. Add the date, the electrician’s contact details and a note of what was done. Anyway, ten minutes now saves hours later.
What if you need help finding what you have?
Call Browns Electrical on 07437 106 825 or email [email protected] and ask. The firm’s hours are Monday to Saturday, 8am to 8pm, and the electrician who quoted your work is the one who carried it out, so questions go to the right person.
It also helps to know that a thorough rewire sits behind most of this. House rewires usually take one to two weeks, and the certificates are the final step of that programme, not an afterthought.
Conclusion
After house rewires and a charger install, expect certification to BS 7671 and, for notifiable work in dwellings, documentation in line with Part P. Browns Electrical provides this across Dudley and the wider West Midlands, whether it’s acting as your rewire contractor or as an approved Ohme EV charger installer. Keep the paperwork safe and ask when in doubt.
FAQs
What certification follows house rewires?
All work is certified to the current IET Wiring Regulations, BS 7671.
Does Part P apply?
Notifiable work in dwellings is completed and certified in line with Building Regulations Part P.
Does a charger installation get certified too?
Yes. An EV charger installer should test and certify the installation.
Who can I show the paperwork to?
Insurers and building control, among others.
Browns Electrical, a family run firm in Bilston, certifies its work, and the same goes when it acts as an EV charger installer. Here’s what that paperwork covers and why it’s worth keeping safe.
What does BS 7671 have to do with it?
BS 7671 is the IET Wiring Regulations. Browns Electrical says all its electrical work is carried out and certified to the current version. In practice that means testing the work and issuing certification, rather than just walking away once the lights turn on.
For homeowners, it’s a plain document that says the job was tested. Nothing flashy. It’s the kind of paper you slide into a folder and forget about until a buyer, insurer or building control wants to see it.
What about Part P?
Part P is the Building Regulations part covering electrical safety in dwellings. Browns Electrical completes notifiable work in dwellings and certifies it in line with Part P, with documentation you can show to insurers and building control.
If you’re unsure whether your job counts as notifiable, just ask the electrician at the quote stage. It’s an easy question, and a good tradesperson answers it without fuss.
Which jobs come with testing certification?
A bathroom customer on the site had a rewire, new spot lights, pendant lights and an extractor fan, and received testing certification at the end. That’s the pattern: do the work, test it, hand over the paper. Nothing hidden.
The same approach applies to bigger jobs. Whether it’s a log cabin installation with conduit and sockets or a full rewire, the work is certified to the same standard. Different sizes of job, the same expectations about paperwork.
What happens with a charger?
An approved Ohme installer like Browns Electrical supplies and fits the Ohme Home Pro and the Ohme ePod, then tests and certifies the installation. Pricing depends on the model, the cable distance and any supply upgrades, all agreed in a written quote first.
A dependable EV charger installer doesn’t treat the certificate as an extra. It’s part of the install, in the same way tightening the last screw is part of the install.
Why keep the documents safe?
Because paperwork has a habit of mattering later. An insurer might ask after a claim. Building control might ask when you extend. A buyer’s surveyor might want to see proof. Documents you can show are far easier than arguing about what was done years ago.
Put certificates in one folder, physical or digital. Add the date, the electrician’s contact details and a note of what was done. Anyway, ten minutes now saves hours later.
What if you need help finding what you have?
Call Browns Electrical on 07437 106 825 or email [email protected] and ask. The firm’s hours are Monday to Saturday, 8am to 8pm, and the electrician who quoted your work is the one who carried it out, so questions go to the right person.
It also helps to know that a thorough rewire sits behind most of this. House rewires usually take one to two weeks, and the certificates are the final step of that programme, not an afterthought.
Conclusion
After house rewires and a charger install, expect certification to BS 7671 and, for notifiable work in dwellings, documentation in line with Part P. Browns Electrical provides this across Dudley and the wider West Midlands, whether it’s acting as your rewire contractor or as an approved Ohme EV charger installer. Keep the paperwork safe and ask when in doubt.
FAQs
What certification follows house rewires?
All work is certified to the current IET Wiring Regulations, BS 7671.
Does Part P apply?
Notifiable work in dwellings is completed and certified in line with Building Regulations Part P.
Does a charger installation get certified too?
Yes. An EV charger installer should test and certify the installation.
Who can I show the paperwork to?
Insurers and building control, among others.